Actuated Valves

Actuated Valves

Product/ImageProduct/SeriesDescriptionProduct/Documents
325_big325Two way brass ball valve with connection for actuator
Diameters from DN015 - ½" to DN050 - 2"
Threaded ends:
● F/M with union ends (ISO228/1) up to DN≤32
● F/F (ISO228/1) for DN40 and DN50
Actuator connection according to ISO 5211 (F03/F05)
Different connections available on request
Air testing according to EN12266-1
TR CU 010 compliant

PN40

Working conditions
● Water: -15°C to +120°C
below 0°C only for water with added antifreeze fluids
over 100°C only for water with added anti-boiling fluids
(Glycolic-ethylene/glycolic-propylene mix >20%, ≤50%)
TECHNICAL SHEET
EZMOTION DEPLIANT
TR CU 010 CERTIFICATE (VALVE ONLY)
32T_big32TT/32TGThree way brass ball valve with connection for actuator
Diameters from DN015 - ½" to DN050 - 2"
Threaded ends:
● M/M/M for union ends (ISO228/1) up to DN≤32
(M threaded union ends kit acc. ISO 228/1 on request)
● F/F/F threaded (ISO228/1) for DN40 and DN50
Actuator connection according to ISO 5211 (F03/F05)
Different connections available on request
Air testing according to EN12266-1
Available in the following versions:
● 32TT, diverting valve with one input and two outputs
● 32TG, mixing valve with two inputs and one output
(also usable as distributing valve)
TR CU 010 compliant

PN40

Working conditions
● Water: -15°C to +120°C
below 0°C only for water with added antifreeze fluids
over 100°C only for water with added anti-boiling fluids
(Glycolic-ethylene/glycolic-propylene mix >20%, ≤50%)
TECHNICAL SHEET
EZMOTION DEPLIANT
TR CU 010 CERTIFICATE (VALVE ONLY)
39BVF39BVFStainless steel ball valve with connection for actuator
Diameters from DN008 - ¼" to DN080 - 3"
Threaded F/F (ISO 228/1)
Actuator connection according to ISO 5211
PTFE seats and packing
TR CU 010 compliant

PN40

Working conditions
● -10°C to +160°C
TR CU 010 CERTIFICATE (VALVE ONLY)
SLOOPL_bigSLOOP-LElectric actuator with ISO 5211 connection< br />Double insulated cover according to CEI/EN 60335-1
Torque 14Nm, travel 90° in 60 seconds
F05-□9 mm connection
(□11 mm stem connections on request)
With 60 cm electric wire
CE compliant

Enclosure protection IP54
Power supply 230VAC, 50Hz/60Hz
2 point (ON/OFF) control
Power 3,5W
Working temperature: 0° to +55°C
TECHNICAL SHEET
EZMOTION DEPLIANT

SLOOP_bigSLOOPElectric actuator with ISO 5211 connection
Double insulated cover according to CEI/EN 60335-1
Torque 14Nm, travel 90° in 60 seconds
Manual override
F05 connection, stem connection □9 mm or □11 mm)
With 60 cm electric wire
(80 cm for versions with 2° switch and phase)
Enclosure protection IP54
CE compliant

Power supply 50Hz/60Hz, versions for 230VAC or 24VAC
2 point (ON/OFF) or 3 point control
Different auxiliary switches and phase switches configurations
Power 3,5W
Working temperature: 0° to +55°C
TECHNICAL SHEET
EZMOTION DEPLIANT
OVERCRAFT_bigOVERCRAFTPneumatic actuator with ISO 5211 connection
Anodized aluminum body, nickel plated steel pinion
Flange, end caps and pistons in die cast aluminum
Steel coated springs with technopolymer cartridge
Torque range (at 6 Bar air supply):
● Up to 3800Nm for double effect versions
● Up to 1400Nm for spring return versions
Optional solenoid valve and limit switch box available

90° travel; 120°, 135°, 150° and 180° versions on request
Allow opening/closing ±10° travel regulation

NAMUR VDI/VDE 3845 upper connection for accessories
NAMUR VDI/VDE 3845 connection for solenoid valve
ISO228/1 ¼” connection for supply fluid
Allowable supply fluid pressures from 1 Bar to 10 Bar
Working conditions: -20°C to +80°C
TECHNICAL SHEET
SOLENOID VALVE TECHNICAL SHEET
LIMIT SWITCH BOX TECHNICAL SHEET
EZMOTION DEPLIANT
CUTTER_bigCUTTERElectric actuator with ISO 5211 connection
Torque range between 20Nm and 300Nm
Manual override
Travel 90°, travel time between 12 and 119 seconds
Electric connections:
● ISO M20 + DIN 43650 3P+T for ER series
● 2 x ISO M20 for VS series
CE compliant

Available in two standard versions:
● 100/240 VAC + 100/350 VDC
● 15/30 VAC + 12/48 VDC
Suitable for 50Hz or 60Hz power supply

2 or 3 points control
4 adjustable 5A limit switches
Torque limiter
TECHNICAL SHEET
EZMOTION DEPLIANT
CUTTER-XL_bigCUTTER-XLElectric actuator with ISO 5211 connection
Torque range between 600Nm and 4000Nm
Manual override
Travel 90°, travel time between 30 and 125 seconds
Electric connections: 2 x ISO M20
Service S2-25%
Enclosure protection IP67
CE compliant

Available in two standard versions:
● 230VAC, 50Hz
● 400VAC 3-ph, 50Hz
Versions for power supply 60Hz on request

3 points control
4 limit switches, 250VAC-16A
1 opening and 1 closing torque limit switch
Torque limiter
Working temperature: -20°C to +60°C
TECHNICAL SHEET